Page 1 of 1
Issues playing with mods on MultiMC (Fabric)
Posted: Sat Apr 29, 2023 6:54 pm
by Soupy Delicious
Sup guys.
Looking forward to jumping back in, and have decided to try out Deco, Better Terrain & Biomes. I can launch the game via multimc no worries, but as soon as I try to use any of the mods, I get this error and it fails to launch.
Just using these three, all the latest versions; all dropped into the correct /mods directory. What gives do ya reckon?
https://pastebin.com/Q9J84vKm
Re: Issues playing with mods on MultiMC (Fabric)
Posted: Sun Apr 30, 2023 3:15 pm
by dawnraider
You are using an old version of BTW. The latest versions of Deco and BTA require BTW CE 2.0.2 or higher.
Re: Issues playing with mods on MultiMC (Fabric)
Posted: Sun Apr 30, 2023 7:28 pm
by Soupy Delicious
dawnraider wrote: ↑Sun Apr 30, 2023 3:15 pm
You are using an old version of BTW. The latest versions of Deco and BTA require BTW CE 2.0.2 or higher.
Untrue! I've fresh-installed and I installed using the Fabric method :|
Re: Issues playing with mods on MultiMC (Fabric)
Posted: Mon May 01, 2023 12:43 am
by EpicAaron
From the log you linked:
The current version is CE 2.0.2, so that might be your problem.
EDIT: Just looked, 2.0.3 is the latest version
Re: Issues playing with mods on MultiMC (Fabric)
Posted: Mon May 01, 2023 9:39 am
by Blacklands
OP might have used the ready-made MultiMC instance that is linked in the installation guide (
https://www.sargunster.com/btwforum/vie ... hp?t=10201)? The BTW version in that is still 2.0.1, and no updated instance containing the latest version has been published there (the link would also need to be updated, since it links to a specific release, you might want to change the link to always point to the latest release of that repo). I used it too and had to manually update to 2.0.3. Which isn't hard, but if you just use the guide and don't check for an updated version you wouldn't be aware that there is one!
Re: Issues playing with mods on MultiMC (Fabric)
Posted: Mon May 01, 2023 10:27 am
by Soupy Delicious
Blacklands wrote: ↑Mon May 01, 2023 9:39 am
OP might have used the ready-made MultiMC instance that is linked in the installation guide (
https://www.sargunster.com/btwforum/vie ... hp?t=10201)? The BTW version in that is still 2.0.1, and no updated instance containing the latest version has been published there (the link would also need to be updated, since it links to a specific release, you might want to change the link to always point to the latest release of that repo). I used it too and had to manually update to 2.0.3. Which isn't hard, but if you just use the guide and don't check for an updated version you wouldn't be aware that there is one!
Hmmm, thank you matey. That might just be it :D